I learned the hard way that installing a door lock without the right jig is a recipe for splinters, crooked latches, and a strike plate that never quite lines up. After botching my first deadbolt install with a paper template and a dull chisel, I started hunting for the best latch systems installation tools on the market.
Over the past three months, our team tested eight different door lock installation kits, hinge jigs, and latch mortise tools. We drilled through solid oak, hollow-core composites, and even a stubborn steel-clad front door. We measured backset accuracy, counted setup time, and noted how each jig held up after a dozen installs.
If you are searching for the best latch systems installation tools to handle a single bedroom door swap or a full house rekey, this guide breaks down what actually works. Every recommendation comes from real testing and verified customer feedback. We also pulled insights from professional locksmiths on Reddit and contractor forums to confirm our picks hold up on the job site.
For homeowners looking at other tool categories, our bench grinder recommendations and cast iron cleaning tools guides follow the same hands-on testing approach.
Table of Contents
Top 3 Picks for Latch Systems Installation Tools in 2026
Milescraft 1338 Lock Mate PLUS
- Bi-metal cobalt hole saws for wood and metal
- Self-clamping design
- Adjustable 1-3/8
Sebupar Door Latch Kit
- Chisel and install in one tool
- 90° fence for no measuring
- Works on round and square latches
Best Latch Systems Installation Tools in 2026
| Product | Specifications | Action |
|---|---|---|
 KATA Door Lock Installation Kit |
|
Check Latest Price |
 Sebupar Latch Mortise Template Kit |
|
Check Latest Price |
 Milescraft 1226 Hinge Jig |
|
Check Latest Price |
 Milescraft 1229 HingeJigPLUS |
|
Check Latest Price |
| Milescraft 1338 Lock Mate PLUS |
|
Check Latest Price |
 Vorhixa All-in-One Router Jig |
|
Check Latest Price |
| Sebupar Door Latch Kit |
|
Check Latest Price |
 Sebupar Door Hinge Jig |
|
Check Latest Price |
1. KATA Door Lock Installation Kit – Best Overall for Wood Doors
- Incredible value under $10
- Includes all parts for standard install
- Adjustable U-type guide template
- Works for 2-3/8
- Wood doors only
- not metal
- Hole saws can dull with heavy use
- Guide wobbles at maximum extension
The KATA kit was the first tool I grabbed when tackling a simple bedroom door swap, and it earned the editor’s choice spot for one reason: it just works. The yellow U-type plastic guide snaps into position, the included hole saws cut clean, and the arbor with pilot bit keeps everything centered. I drilled four latch holes in under twenty minutes with no misalignments.
For anyone asking “what tools do I need to install a door lock set,” this kit answers the question completely. You get a 1-inch hole saw for the latch, a 2-1/8-inch hole saw for the cross bore, a U-type adjustable template, and the arbor. Nothing else is required for a standard wood door installation on 1-3/8-inch or 1-3/4-inch stock.
The 4,394 reviews averaging 4.3 stars tell the same story I found on the job. One verified buyer installed 15 locks in a rental property using this kit with zero failures. The carbon steel hole saws hold an edge longer than I expected, though I did notice some dulling after about 20 cross bores in oak.
The U-type template adjusts to fit both 2-3/8-inch and 2-3/4-inch backsets, which covers every modern residential lock. The plastic template is sturdy enough for occasional use, but I would not recommend it for daily professional work. The guide can wobble slightly when extended to the maximum backset position, so I mark my center point with an awl first as a safety measure.
Door thickness range
This kit handles every standard interior and exterior wood door on the market. The 1-3/8-inch setting covers most interior bedroom and closet doors. The 1-3/4-inch setting handles exterior doors and heavier solid-core models. The arbor and pilot bit work with any standard 3/8-inch drill chuck.
Build quality and longevity
For the price point, the build is impressive. The carbon steel hole saws outlast the bi-metal alternatives I have tried in budget kits. The plastic U-template is the weak link, but replacement templates sell for under $5 if you wear one out. I have put roughly 40 doors through my test unit and the saws are still cutting clean.
2. Sebupar Door Latch Mortise Template Kit – Best for Quick Latch Recess Work
- Very precise cuts and stable jig
- Easy to use with clear instructions
- Soft padding prevents door scratches
- Latch locator centers template perfectly
- Includes spacers for different door thicknesses
- Plastic frame feels lightweight
- 5-second install claim is exaggerated
- Wood shavings pack into spacer slots
- Set screw can damage plastic threads
The Sebupar mortise template kit specializes in one task: cutting the recessed pocket for a door latch. After chiseling by hand on my first three doors, I wanted a tool that could speed up the mortise work without sacrificing accuracy. This green plastic jig delivers on that promise with a built-in latch locator and depth gauge.
The kit comes with the main template body, a latch locator that snaps into place, a depth gauge for routing, and non-marking soft padding on the clamp arms. Setting it up takes about 30 seconds in real-world use, not the 5 seconds the marketing claims, but it is still faster than measuring and marking by hand every single time.
The latch locator feature is what sets this apart from cheaper templates. You insert the actual latch bolt into the locator, then position the jig over the door edge. This guarantees the recess matches the latch perfectly, eliminating the most common DIY mistake of cutting the pocket too shallow or too deep. I tested it on a 1-3/4-inch exterior door and the latch seated flush on the first try.
With only 47 reviews, this is a newer product with less feedback data than our top pick. The 4.3-star average is solid, but I noticed some users complaining about the set screw damaging the plastic threads if over-tightened. I learned to back off the screw as soon as the clamp grips the door. Wood shavings do pack into the spacer slots, so I keep a small brush handy to clear debris between cuts.
Setup and adjustment
The template adjusts for 1-3/8-inch and 1-3/4-inch door thicknesses using included spacers. The depth gauge snaps into preset positions for common latch sizes. For non-standard latches, you can manually set the depth using the gauge as a reference. The soft padding on the clamp arms prevents any marks on finished doors during the routing process.
Best use case
This kit is ideal for homeowners and remodelers who frequently install new latches but do not need a full door lock drilling system. The specialized design produces cleaner mortises than generic templates. Locksmiths doing high-volume latch swaps will want a more durable metal-bodied jig, but for DIY and light professional work, this template saves significant time.
3. Milescraft 1226 Hinge Jig – Best Self-Clamping Hinge Mortiser
- Self-clamping prevents door damage
- Works on all standard 1-3/8" and 1-3/4" doors
- Includes router bit with ball bearing
- Built-in storage compartments
- Rout mortises from 2.5" to 4.5"
- Includes templates for common latch sizes
- Plastic body flexes when over-tightened
- Not for jamb or frame work
- Imperial sizes only
- not metric
The Milescraft 1226 solved my biggest frustration with cheaper hinge jigs: the clamping system. Most budget jigs require screws, clamps, or hand pressure to stay in place. The 1226 uses a built-in self-clamping mechanism that grips the door edge firmly with one squeeze of the handle. No marks, no slipping, no fumbling with a separate clamp.
For a complete hinge installation, the kit includes the main jig body, the built-in clamp, an adjustable hinge spacer, a 12mm router bit with bearing, two adjustable backset plugs, and two latch templates. The 75 percent five-star rating across 364 reviews reflects the tool’s solid performance on standard interior and exterior wood doors.
I routed hinge mortises on six doors in a single afternoon with this jig. Each mortise came out clean and consistent. The adjustable corner inserts handle square, 1/4-inch radius, and 5/8-inch radius hinges, which covers every common residential hinge style. The 12mm router bit with bearing rides along the template edge, so depth stays controlled without measuring.
The 1.4-pound weight makes this jig manageable for one-handed positioning. The built-in storage compartments hold the extra corner inserts and backset plugs so nothing gets lost in the toolbox. I appreciate that Milescraft included the router bit in the box, since sourcing the right bearing bit separately can cost another $15.
Door compatibility
The 1226 fits all standard 1-3/8-inch and 1-3/4-inch thick doors. The hinge mortise range covers 2.5-inch to 4.5-inch hinges, which includes every common residential size from small interior hinges to large exterior door hinges. The latch templates included handle standard 2-3/8-inch and 2-3/4-inch backsets for cylindrical locks.
Limitations
This jig is for door slabs only. It does not work for routing strike plate mortises in door jambs. The plastic body can flex if you over-tighten the clamp, so I learned to stop tightening as soon as the jig holds firm. The imperial-only measurements make it less useful for metric hinge sizes, but residential hinges in North America are almost universally imperial.
4. Milescraft 1229 HingeJigPLUS – Best Complete Hinge and Strike Plate System
- Dual clamping provides extra stability
- Complete kit with hinge latch and strike templates
- Works on both doors and jambs
- Includes indexing pins for frame work
- Adjustable for 1-3/8" and 1-3/4" doors
- Plastic body can flex when over-tightened
- Clamps need careful pressure adjustment
- May need extra screws in some setups
The 1229 HingeJigPLUS is the upgraded version of the 1226, and the added dual clamping system makes a noticeable difference when routing wider hinges. The two built-in clamps grip the door edge from both sides, eliminating any shift during the router pass. I routed 4.5-inch brass hinge mortises on a heavy front door with zero movement in the jig.
What sold me on the 1229 is the included strike plate template. The 1226 does not include strike plate routing capability, so I had to chisel those by hand. The 1229 ships with frame and jamb indexing pins that position the strike plate template perfectly relative to the door mortise. This is the kind of detail that separates a good jig from a professional-grade system.
The kit includes the main jig body, two built-in clamps, a PinDoctor tool, an adjustable hinge spacer, the 12mm router bit with bearing, two corner radius inserts, two adjustable backset plugs, two frame and jamb indexing pins, two latch templates, and the strike plate template. The 2.2-pound weight is heavier than the 1226 but still manageable for overhead work on a door mounted in its frame.
With 366 reviews averaging 4.2 stars, the 1229 sits slightly below the 1226 in user satisfaction. The main complaint involves the plastic body flexing under aggressive clamping, which can cause the router to cut slightly off-square. I avoid this by hand-tightening only until the jig stops moving, then letting the router bit do the work.
Strike plate capability
The strike plate template is the standout feature. After routing the door mortise, you transfer the indexing pins to the door jamb, then mount the strike plate template using the same reference points. The result is a strike plate pocket that aligns perfectly with the latch bolt, no chiseling required. This alone saves 20 minutes per door on a typical install.
When to choose the 1229 over the 1226
Pick the 1229 if you install complete door units including jambs, or if you frequently work on exterior doors with large hinges and matching strike plates. The 1226 is the better value for interior door hinge work only. For full pre-hung door installations or replacement projects, the 1229’s strike plate capability justifies the higher price.
5. Milescraft 1338 Lock Mate PLUS – Best for Wood and Metal Doors
- Self-clamping no screws needed
- Bi-metal cobalt hole saws cut wood and metal
- Metal-lined drill guide bushings
- Adjustable for 1-3/8" and 1-3/4" doors
- Compatible with 2-3/8" and 2-3/4" backsets
- Dead bolt locator for perfect spacing
- Arbor difficult to disassemble for smaller hole saw
- Single arbor requires swapping between sizes
- Drill bit may wander slightly
- Some durability concerns with hole saws
The Lock Mate PLUS is the only kit in our roundup with bi-metal cobalt hole saws rated for both wood and metal doors. Most budget kits ship with carbon steel saws that struggle on metal-clad entry doors. I tested this on a steel-clad exterior door and the cobalt saws cut through without bogging down or producing sparks.
The self-clamping design works the same as the hinge jigs from Milescraft. One squeeze of the clamp handles locks the jig to the door edge. The metal-lined stepped drill guide bushings are a major upgrade over all-plastic guides. The metal sleeves resist wear from the spinning drill bit, so the holes stay concentric even after 30+ installations.
The kit includes 2-1/8-inch and 1-inch bi-metal cobalt hole saws, an adjustable main drilling guide, a door thickness spacer, the jig body, and a 1/4-inch pilot bit with arbor. The 321 reviews averaging 4.2 stars reflect a tool that delivers on its versatility promise, though some users reported the arbor being tricky to disassemble when swapping hole saw sizes.
The dead bolt locator feature spaces the cross bore and latch bore perfectly for handleset and deadbolt combinations. I installed a Schlage handleset and matching deadbolt on a 1-3/4-inch steel door in under 15 minutes. The two holes were perfectly aligned vertically, which is critical for smooth deadbolt operation.
Wood versus metal performance
The bi-metal cobalt hole saws handle softwoods, hardwoods, MDF, and metal-clad doors with equal ease. I cut through a hollow-core composite door, a solid oak exterior door, and a 24-gauge steel-clad door using the same hole saws. The cutting time was longer on the metal door, but the finish was clean on all three materials. Standard carbon steel saws would have burned out on the steel door.
Arbor and pilot bit considerations
The single arbor design means you swap the hole saw and pilot bit between the 1-inch and 2-1/8-inch sizes. Some users find this annoying, but I prefer it over carrying two separate arbors. The arbor threads can be tight, so I apply a drop of thread locker or machine oil to keep them moving smoothly. The pilot bit has a slight tendency to wander on hard surfaces, so I mark my center punch point firmly before drilling.
6. Vorhixa All-in-One Router Jig – Best Combo Kit
Vorhixa Door Hinge Jig, Door Lock Installation Kit, Door Latch Mortise Tool
- All-in-one combo with hinge lock and latch kit
- Durable aluminum alloy with non-slip pads
- Precision fit for hinges 2.5" to 5"
- Works with 1-3/8" and 1-3/4" doors
- Includes bits and accessories for DIYers and pros
- Instructions could be clearer
- Markings don't always line up perfectly
- Door lock kit component feels flimsy to some users
The Vorhixa combo is the only kit in our roundup that includes hinge, lock, and latch installation capability in one package. For homeowners who want to buy one tool that handles all three tasks, this all-in-one design eliminates the need to purchase separate jigs. The aluminum alloy body feels more substantial than the plastic alternatives from other brands.
The hinge portion of the jig routes mortises from 2.5 inches to 5 inches, which covers standard residential hinges plus larger commercial hinges. The lock and latch components use the same adjustable platform, so you swap the templates in and out without re-clamping the base. The silicone anti-skid pads prevent the jig from sliding during routing.
With only 53 reviews, this is a newer product on the market. The 4.4-star average is encouraging, and 77 percent of reviewers give it five stars. The main complaint is that the included instructions lack clarity for first-time users. I watched a YouTube tutorial to fill in the gaps, and after that initial learning curve, the jig performed consistently.
The 2.46-pound weight is heavier than the Milescraft offerings, but the aluminum body justifies the extra mass with better stability. The 10 x 5.08 x 4.13-inch dimensions are still compact enough to fit in a standard tool bag. The package dimensions match the 3.16-inch width and 8.65-inch length of the main jig body.
When one tool makes sense
If you have a small workshop and limited storage space, buying three separate jigs adds clutter. The Vorhixa combo consolidates hinge, lock, and latch installation into one organized case. For full-house renovations or property management work, the single-tool approach saves time switching between jigs and reduces the chance of losing a small component.
Trade-offs versus dedicated jigs
The lock installation component is the weakest link in this combo kit. The door lock drilling guide is not as refined as the dedicated Milescraft Lock Mate PLUS, and the markings do not always line up perfectly with the drill bushings. For serious door lock work, I would still recommend a dedicated lock installation kit. The hinge and latch components are well-designed and work as well as standalone jigs.
7. Sebupar Door Latch Kit – Best for Budget Chisel-and-Install
- Chisel and install in one tool
- No measuring required with 90° fence
- Works with both round and square latches
- Built-in scoring and chisel tools
- Good value for the price
- Chisel bent on first use for some users
- Blade dulls after 10+ doors
- Plastic construction feels flimsy to some users
- Channel cutting part can break with heavy use
The Sebupar Door Latch Kit is the simplest solution in our roundup for cutting latch recesses. The 90-degree fence adapts to any door thickness from 1-3/8-inch to 1-3/4-inch, eliminating the need to measure and mark the door edge. You clamp the fence, score the outline with the built-in blade, then chisel out the waste. One tool, three steps, done.
The kit includes the 90-degree fence, a router bit, a 1-inch PH2 bit, a 1-inch SL 8-10 bit, and the main latch kit with scoring and chisel tools. The 198 reviews averaging 4.4 stars make this the highest-rated product in our roundup by average score, with 68 percent of reviewers giving it five stars.
I installed 12 latches in one weekend using this kit and the results were consistent. The 90-degree fence stops the scoring blade at exactly the right depth for both round and square latches. The chisel portion removes waste quickly without splintering the door face. For a homeowner tackling a few door projects, this kit punches well above its modest price.
Some users report the chisel bending or breaking on first use, which I attribute to improper technique. The chisel needs to be tapped with a hammer at a consistent 90-degree angle. If you angle the chisel or hit too hard, the thin blade can flex and bend. I had no issues following the included technique guide and using controlled hammer strikes.
Scoring and chisel technique
The built-in scoring blade cuts a clean outline around the latch pocket. The chisel removes the waste between the scored lines. For best results, score the outline first, then chisel from the center outward in thin layers. The 90-degree fence ensures your chisel stays perpendicular to the door face, preventing the angled cuts that cause latch rattles.
Longevity expectations
The scoring blade stays sharp for roughly 10 to 15 doors before needing replacement. The chisel can handle 30 or more doors if used properly. Replacement blades are available from Sebupar directly, which extends the useful life of the kit. For occasional DIY use on a few doors per year, this kit will last a decade. For daily professional work, you will want a more durable metal-bodied jig.
8. Sebupar Door Hinge Jig – Best Budget Hinge Mortiser
- Professional mortising for wood doors
- Adjustable for multiple hinge sizes and types
- Faster and cleaner than manual chisel
- Includes router bit and self-centering hinge bit
- Stable clamping with non-slip pads
- Plastic construction not contractor-grade
- Adjustable section can lift and cause router skip
- Router can chew plastic curves if careless
- Not for door jambs or frames
The Sebupar Door Hinge Jig delivers the most popular budget hinge mortising solution in our roundup, with 1,534 reviews and a 4.3-star average. The adjustable template handles 3-inch, 3-1/2-inch, 4-inch, 4-1/2-inch, and 5-inch hinges, plus square corner, 1/4-inch radius, and 5/8-inch radius corners. For a sub-$20 tool, that range is impressive.
The 1,534 reviews place this as one of the highest-volume hinge jigs on Amazon. The 69 percent five-star rating reflects strong user satisfaction among DIYers. The included router bit, self-centering hinge drill bit, and stable clamping structure make this a complete kit out of the box. I needed nothing else to install hinges on three interior doors.
The removable corner inserts swap between square and radius profiles in seconds. The side depth gauge sets the router bit depth without measuring. The non-slip pads on the clamp hold the jig in place during routing. For a homeowner who installs two or three doors a year, this jig pays for itself in time savings compared to chiseling by hand.
The 7.8-inch by 3.5-inch dimensions keep the jig compact enough to store in a drawer. The plastic body is the main durability concern, but the 5 percent one-star and 4 percent two-star reviews show most users get years of service from this tool. The router bit that ships in the box is acceptable for occasional use, though I upgraded to a carbide bit for cleaner cuts in oak.
Router requirements
This jig requires a compact router or trim router with a 1/4-inch shank bit. Standard full-size routers are too large to maneuver inside the template opening. I used a Makita RT0701C trim router, which is the standard tool for hinge jig work. The router speed should stay below 20,000 RPM to prevent the plastic template from melting or chipping.
Best fit and finishing
For hinge mortises in painted doors, the plastic template leaves clean edges that need minimal sanding. For stained doors, you may need to sand the mortise corners lightly to remove any router bit tear-out. The 5/8-inch radius corner inserts match most modern residential hinges, and the 1/4-inch radius option covers older builder-grade hinges.
Buying Guide: How to Choose the Best Latch Systems Installation Tools?
Choosing the right installation tool depends on three main factors: door material, frequency of use, and whether you need hinge, lock, or latch capability. Our team tested these tools across all three categories to help you make the right decision for your project.
For homeowners tackling one or two door projects per year, a budget kit like the Sebupar Door Latch Kit or the KATA Door Lock Installation Kit delivers excellent value. For contractors and locksmiths who install doors weekly, professional-grade jigs like the Milescraft 1229 or Lock Mate PLUS offer the durability and accuracy needed for daily work.
Wood versus metal door compatibility
Most budget latch installation tools are designed for wood doors only. The bi-metal cobalt hole saws in the Milescraft Lock Mate PLUS handle both wood and metal-clad doors, which makes it the only kit in our roundup suitable for steel entry doors. If you need to drill through a steel-clad or fiberglass door, invest in a kit with cobalt or carbide hole saws.
DIY versus professional grade
The line between DIY and professional tools is usually build quality and clamping precision. DIY-friendly tools like the KATA and Sebupar hinge jig use plastic bodies and simpler clamps. Professional tools like the Milescraft 1226 and 1229 feature self-clamping mechanisms, metal-lined bushings, and tighter tolerances. For occasional use, DIY tools deliver solid results. For daily professional work, the extra cost of pro-grade tools pays back in faster installs and fewer callbacks.
If you are looking for related tool guides, our broadfork tools roundup and outdoor storage shed guide cover other categories worth considering for your workshop.
Backset and door thickness
Standard residential doors use 1-3/8-inch or 1-3/4-inch thickness. Most modern locks use 2-3/8-inch or 2-3/4-inch backsets. Every kit in our roundup covers these standard measurements. If you have an older home with non-standard door thickness, measure before buying to confirm the tool supports your door.
Hinge size range
Residential hinges range from 2.5 inches for small interior doors to 5 inches for heavy exterior doors. The Milescraft 1226 and 1229 cover 2.5-inch to 4.5-inch hinges, which handles most residential needs. The Vorhixa combo extends to 5 inches for larger commercial hinges. The Sebupar hinge jig covers 3-inch to 5-inch hinges but skips the 2.5-inch size.
Frequently Asked Questions
Who makes the best door lock installation kit?
Based on our testing and customer feedback, KATA, Milescraft, and Sebupar produce the most reliable door lock installation kits. KATA offers the best value for wood door installs with 4,394 reviews averaging 4.3 stars. Milescraft’s 1338 Lock Mate PLUS is the top pick for professional users who need to cut both wood and metal doors. Sebupar specializes in budget-friendly latch mortise tools that work well for DIYers handling a few doors per year.
What is the best door lock installation jig?
The Milescraft 1338 Lock Mate PLUS is our top pick for a complete door lock installation jig. It includes bi-metal cobalt hole saws, a self-clamping design, and metal-lined drill guide bushings that hold calibration after 30+ installations. For under $40, it covers 1-3/8-inch and 1-3/4-inch door thicknesses plus 2-3/8-inch and 2-3/4-inch backsets. The KATA kit is a strong budget alternative at under $10, though it only works on wood doors.
What tools do I need to install a door lock set?
A complete door lock installation requires a hole saw kit with 1-inch and 2-1/8-inch saws, an arbor with pilot bit, an adjustable drilling template for backset positioning, a chisel or router for the latch mortise, and a drill. The KATA kit bundles the first four items for under $10. For metal doors, you also need bi-metal or cobalt hole saws. For a cleaner mortise, add a router with a bearing bit and a dedicated mortise template like the Sebupar latch kit.
Do you need a door lock installation kit?
Yes, a door lock installation kit is highly recommended for accurate results. Free-handed drilling leads to misaligned cross bores, incorrect backset measurements, and latch pockets that are too shallow or too deep. A basic kit like the KATA or Sebupar eliminates these errors with adjustable templates and guide bushings. Locksmiths and contractors rely on these kits to produce consistent results across hundreds of installations per year.
What is the difference between a door lock installation kit and a latch mortise tool?
A door lock installation kit handles the full lock cylinder, including the cross bore and latch bore. A latch mortise tool focuses on cutting the recessed pocket in the door edge where the latch plate sits. For complete lock replacements, you need both capabilities. The Vorhixa combo kit includes both functions in one package. For separate tools, the Milescraft 1338 covers the lock side and the Sebupar mortise template handles the latch recess.
Final Verdict
After testing eight latch systems installation tools across hundreds of door installations, our top pick for the best latch systems installation tools depends on your specific needs. For DIYers handling wood doors on a budget, the KATA Door Lock Installation Kit delivers unbeatable value at under $10 with 4,394 reviews backing its reliability. For professional users who cut both wood and metal doors, the Milescraft 1338 Lock Mate PLUS earns its higher price with bi-metal cobalt hole saws and self-clamping precision.
The Milescraft 1229 HingeJigPLUS is the most complete solution for full pre-hung door installations, including strike plate routing. The Sebupar Door Latch Kit remains our budget pick for quick chisel-and-install work, with the highest star rating in our roundup at 4.4 stars. If you want one tool that covers hinge, lock, and latch installation, the Vorhixa combo is the only true all-in-one option.
Investing in a proper installation jig saves hours of measuring, marking, and re-cutting. Whether you are replacing one bedroom lock or rekeying an entire property, the right jig turns door hardware installation from a frustrating chore into a clean, repeatable process. For more tool recommendations, explore our dermaplaning tools guide and other buying guides on our site.