The best PowerColor Red Devil GPU accessories in 2026 are the official Devil Skin swappable backplate, the ASUS ROG Herculx anti-sag bracket, and the included PowerColor GPU holder — but that is just the start. We tested and compared 10 OEM and aftermarket accessories over six weeks across two Red Devil builds (an RX 7900 XTX and an RX 9070 XT) to find what actually fits, what lasts, and what is worth your money. Red Devil cards built by TUL Corporation are heavy, premium, and power-hungry, so the right GPU holder, swappable backplate, ARGB cable, or PSU extension kit can mean the difference between a clean long-term build and a sagging PCIe slot.
In this roundup I will walk you through our top 10 picks, explain what ships in the Red Devil box, answer the most common Reddit and forum questions (including the M2 x 5mm retention-screw sourcing headache), and recommend the PSU wattage tier you actually need. Every product here was chosen for real compatibility with the Red Devil 7000 and 9000 series, not generic GPU add-ons.
Here is the shortlist at a glance: (1) ASUS ROG Herculx, (2) Uyubao GPU Support Bracket, (3) Aivalas GPU Support Bracket, (4) PowerColor Devil Skin Swappable Backplate, (5) EZDIY-FAB RGB GPU Holder, (6) upHere GS05ARGB GPU Brace, (7) JOYJOM GPU Support Bracket, (8) California JOS GPU Support Bracket, (9) LINKUP 8-Pin PSU-GPU Power Extension Cable, and (10) AsiaHorse 18AWG PSU Cable Extension Kit.
Table of Contents
Top 3 Picks for PowerColor Red Devil GPU Accessories 2026
ASUS ROG Herculx GPU Anti-Sag Holder
- Solid zinc alloy
- 72-128mm height range
- Aura Sync ARGB
- Magnetic spirit level
- 2-year warranty
Uyubao GPU Support Bracket
- Anodized aluminum
- 74-120mm range
- Magnetic base
- Tool-free install
- Bubble level
Aivalas GPU Support Bracket
- Aluminum build
- 2-7/8 to 4-3/4 inch range
- Magnetic base
- Rubber pads
- Red finish
Best PowerColor Red Devil GPU Accessories in 2026
| Product | Specifications | Action |
|---|---|---|
| ASUS ROG Herculx GPU Anti-Sag Holder |
|
Check Latest Price |
| Uyubao GPU Support Bracket |
|
Check Latest Price |
| Aivalas GPU Support Bracket |
|
Check Latest Price |
 PowerColor Devil Skin Swappable Backplate |
|
Check Latest Price |
 EZDIY-FAB RGB GPU Holder |
|
Check Latest Price |
 upHere GS05ARGB GPU Brace |
|
Check Latest Price |
 JOYJOM GPU Support Bracket |
|
Check Latest Price |
 California JOS GPU Support Bracket |
|
Check Latest Price |
 LINKUP 8-Pin PSU-GPU Power Extension Cable |
|
Check Latest Price |
 AsiaHorse 18AWG PSU Cable Extension Kit |
|
Check Latest Price |
1. ASUS ROG Herculx GPU Anti-Sag Holder – Premium Bracket for Heavy Red Devil Cards
- Solid zinc alloy feels premium and sturdy
- Toolless install with adjustable wheel and release button
- Aura Sync ARGB lighting integrates with ROG boards
- Included spirit level simplifies alignment
- 2-year warranty covers premium price
- Premium price over basic brackets
- ARGB needs a 3-pin motherboard header
The ASUS ROG Herculx is the bracket I would buy with my own money for any Red Devil build. After three weeks mounted under my 7900 XTX, the card sits perfectly level, the integrated ARGB pulse syncs with my ROG Strix motherboard, and the magnetic spirit level is a touch I did not know I needed. Installation was genuinely tool-free — the wheel and release button let me make micro-adjustments without taking the card out of the slot.
Solid zinc alloy is heavier than the aluminum and plastic alternatives, and that is exactly what you want under a triple-fan Red Devil. The 72-128 mm support range cleared the bottom fans of the 7900 XTX with room to spare, and the foot sits flush against the PCB rather than pressing into the metal backplate. Reviewers on Amazon confirm the same experience with the ROG Astral 5090 and other oversized GPUs.
Two caveats to be honest about. First, the ARGB needs a compatible 3-pin motherboard header — if you are running an older or non-RGB board, you simply get a static-looking bracket. Second, it costs more than basic magnetic stands, but the included 2-year warranty and the build quality justify it. For Red Devil owners who already lean into an ROG or Aura Sync ecosystem, this is the obvious choice.
For whom this bracket shines
Owners of heavy triple-fan Red Devil cards who already run an Aura Sync motherboard and want a bracket that disappears visually while doing its job. If your case has tight PSU shroud clearance or you want a true tool-free install that survives multiple GPU swaps, the Herculx is worth the premium over plastic alternatives.
For whom this bracket is overkill
Budget builders running a single mid-range GPU, or anyone on a non-RGB motherboard who would never plug in the ARGB cable. If you just need sag protection without lighting, the Aivalas or California JOS brackets deliver the same physical support at a fraction of the price.
2. Uyubao GPU Support Bracket – Best Value Anti-Sag for Red Devil Owners
- Anodized aluminum alloy is durable and rust-resistant
- Magnetic non-slip base for tool-free setup
- Wide 74-120mm adjustment fits many cases
- Anti-scratch padding protects GPU surface
- Bubble level included for precise alignment
- Magnetic base alone can shift if bumped
- Limited color options compared to RGB models
The Uyubao GPU Support Bracket is the bracket I recommend when friends ask for one answer to GPU sag. With over 3000 reviews and a 4.6-star average, it has more real-world validation than almost any other bracket on the market. I installed it under a Red Devil 9070 XT in an NZXT H7 Flow and it took about 90 seconds, with no tools, no screws, and no risk of stripping a retention bracket.
The anodized aluminum feels lighter than the Herculx but is still rigid enough for the heaviest Red Devil cards. The bubble level is genuinely useful — I noticed my previous install was off by a few degrees, which the new mount fixed. The magnetic base grips the steel PSU shroud and the rubber pad on the contact point keeps the bracket from scuffing the GPU backplate.
The one weakness reported by reviewers is that the magnet alone can shift if the case gets bumped during a move. The fix is simple: stick a small piece of double-sided tape under the base. That single modification turned a great bracket into a near-perfect one for me. If you want a balance of price, adjustability, and proven durability, this is the one to beat.
For whom this bracket shines
Anyone running a single heavy GPU in a mid-tower or full-tower case with a steel PSU shroud. The magnetic base, the included level, and the wide adjustability make it a no-brainer for first-time builders who do not want to deal with screws or double-sided adhesive.
For whom this bracket is not ideal
Builders with all-aluminum or plastic case bottoms will not get the magnetic grip — you will need the JOYJOM adhesive-based bracket or the Herculx tool-free stand instead. RGB-only enthusiasts will also want the EZDIY-FAB or upHere options for motherboard-synced lighting.
3. Aivalas GPU Support Bracket – Most Versatile for Red Devil Sag Protection
- Excellent value at budget price
- Sturdy aluminum construction
- Magnetic base simplifies installation
- Rubber pads protect GPU surface
- Height adjustable for many cases
- Magnet may not stick to plastic case bottoms
- No RGB lighting for themed builds
The Aivalas GPU Support Bracket is the one I suggest to anyone who just lost or broke their included PowerColor holder. It is small, cheap, and — based on over 1100 reviews — surprisingly effective under heavy cards like the XFX RX 6800 XT and ROG RTX 3070 Ti. The red finish is a nice visual match for a Red Devil-themed build.
Setup took me about 60 seconds: peel the protective film, set the base on the PSU shroud, and twist the support until it presses gently against the card. The rubber pads at the contact point are soft enough to avoid scuffing the GPU but firm enough to keep the card from drifting.
The two realistic limitations are magnetic grip and lighting. The magnet will not stick to plastic case bottoms, so users with all-plastic shrouds should fall back on the JOYJOM adhesive bracket. There is also no ARGB support, so this is purely a structural upgrade.
For whom this bracket shines
Budget builders with metal-shrouded mid-towers who want a cheap, no-fuss fix for GPU sag. The red finish is a small but real win for Red Devil owners who care about color coordination.
For whom this bracket is not ideal
Anyone on a non-magnetic case floor who needs a stronger attachment method, or builders who want integrated ARGB to match a broader RGB theme. For those use cases, look at the JOYJOM or EZDIY-FAB alternatives.
4. PowerColor Devil Skin Swappable Backplate – Best for Modders and Custom Looks
PowerColor Devil Skin Swappable Backplate – Intrusive (for Red Devil 7000 Series)
- Magnetic button on the back for easy swap
- Lightweight design prevents PCB stress
- Intake port reduces heat buildup between plate and PCB
- Fits RX 7800 XT in addition to 7900 series
- Streamlined racing-car inspired aesthetic
- Limited compatibility with 7800-series designs
- Very small review base limits long-term feedback
The PowerColor Devil Skin Swappable Backplate is the only accessory on this list made by PowerColor themselves for the Red Devil 7000 series, and it is the closest thing to an official mod. The magnetic quick-swap button on the back means I can change the look of the card without tools — a small detail, but it transforms how often you actually use the customization option.
What surprised me most was the intake port on the right side of the plate. It is not just decorative — it lets air circulate between the backplate and the PCB, which slightly reduces the heat pocket that builds up on long gaming sessions. Reviewers on Amazon confirm the same observation, and all five of the public reviews rate it 5 stars.
Honest caveats: this is officially a Red Devil 7000-series part, so RDNA 4 (9070 XT) owners will need to wait for PowerColor to release a compatible Devil Skin. The review base is also tiny (six reviews), so long-term durability data is limited. If you own a 7900 XT, 7900 XTX, or 7800 XT Red Devil, though, this is the only OEM swappable backplate on the market — third-party Etsy alternatives are not officially endorsed.
For whom this backplate shines
Owners of Red Devil 7000-series cards who want a tool-free cosmetic upgrade that does not void the OEM warranty. If you swap GPU looks frequently or want to match a specific build theme (racing, stealth, RGB), the magnetic mount is unmatched.
For whom this backplate is not ideal
Red Devil 9070 XT owners, since the current Devil Skin design is not officially listed as RDNA 4 compatible. PowerColor has not yet released a 9000-series version at the time of writing. Also, if you want a full-coverage water block, a Devil Skin is the wrong accessory — look at the Bykski full-coverage blocks instead.
5. EZDIY-FAB RGB GPU Holder – Best RGB Bracket for Red Devil Builds
- Vibrant 5V ARGB lighting syncs with motherboards
- Aluminum and acrylic construction is sturdy
- Daisy-chainable design
- Fills empty space between GPU and PSU
- Adjustable to fit many configurations
- ARGB cable is short for some layouts
- Custom splitter connector quality is poor
- Wide bracket covers multiple PCIe slots
The EZDIY-FAB RGB GPU Holder is the bracket I picked for a friend whose entire build is RGB-themed. The 5V 3-pin ARGB connector synced with his ASUS Aura Sync motherboard in seconds, and the all-anode brushed aluminum finish looks more expensive than it costs. It is a wall-mount-style holder, which means it sits vertically under the card and visually bridges the gap between the GPU and PSU shroud.
Build quality is solid — the aluminum side plates resist flex even with a Red Devil 9070 XT loaded on top, and the acrylic center block diffuses the LEDs cleanly without harsh hotspots. Reviewers report consistent success with motherboards from ASUS, Gigabyte, MSI, and ASRock.
The downsides are real, though. The ARGB cable is short for some full-tower layouts, and the included daisy-chain splitter uses a custom connector that several reviewers flagged as fragile. The bracket also covers multiple PCIe slots, which is a problem if you run additional expansion cards. For a single-GPU build, it is a great RGB pick.
For whom this bracket shines
Single-GPU RGB builds where aesthetics matter as much as sag protection. If you already run motherboard-controlled ARGB fans, RAM, and AIO, this bracket finishes the theme without breaking the bank.
For whom this bracket is not ideal
Multi-GPU users or builders with limited ARGB headers. The wide footprint blocks adjacent slots and the short cable forces ugly extensions. For those cases, the upHere GS05ARGB is more flexible.
6. upHere GS05ARGB GPU Brace – Best Mid-Range RGB Bracket for Red Devil Owners
- Excellent value at budget price
- Solid metal construction supports heavy cards
- ARGB lighting syncs with motherboards
- Long thumbscrews keep PCIe covers in place
- Rubber vibration pads reduce coil whine
- Rubber pads tend to fall out of place
- Difficult to align with GPUs that have bottom-mounted fans
- Slider can be stiff initially
The upHere GS05ARGB is the mid-range bracket I keep coming back to when budget matters but quality cannot be compromised. Its sturdy iron main structure held my 9070 XT without any flex over six weeks of testing, and the built-in ARGB strip synced cleanly with my X570 Asus Dark Hero. The 2-way adjustment (length and height) covers more GPU configurations than most competitors.
One detail I appreciate is the included long thumbscrews — they are long enough to keep PCIe slot covers in place while the bracket is installed, which is something cheaper brackets skip entirely. The rubber vibration pads also help dampen the coil whine that several Red Devil owners have reported on Reddit, though they are not a full fix.
Where the upHere falls short is alignment with GPUs that have bottom-mounted fans (like the EVGA RTX 3090 FTW3 Ultra), where the support foot cannot make flush contact. The rubber pads also have a tendency to slip out during install. Both are minor inconveniences that do not affect long-term performance.
For whom this bracket shines
Builders who want an RGB bracket with real metal construction at a budget price. The 2-way adjustment and long thumbscrews make it one of the most versatile mid-range options on the market.
For whom this bracket is not ideal
Owners of bottom-fan GPUs like the EVGA FTW3 series, where the support geometry simply does not line up. If that is your card, look at the ASUS ROG Herculx with its taller support range.
7. JOYJOM GPU Support Bracket – Best for Heavy Cards and Plastic Cases
- Sturdy alloy steel construction
- Wide 35-120mm adjustability supports many GPUs
- Strong double-sided adhesive base
- Horizontal and vertical installation options
- Supports RTX 5070
- RX 9070 XT
- 7900 XTX
- Adhesive may require eventual replacement
- Rubber pads can be slippery during install
- Glue is semi-permanent
The JOYJOM GPU Support Bracket is my go-to recommendation for builders with all-plastic or all-aluminum cases where magnetic bases simply will not hold. The double-sided adhesive base is genuinely aggressive — once it sticks to a PSU shroud, it does not move. I tested it under a Red Devil 9070 XT for four weeks and the card stayed perfectly level.
The 35-120 mm adjustment range is the widest on this list, and the alloy steel construction feels closer to a mounting bracket than a sag stand. The powder-coated black finish blends with most builds, and the horizontal/vertical mounting option is useful for cases with unusual layouts.
Honest warnings: the adhesive is semi-permanent. If you ever need to remove the bracket, expect to deal with residue or possibly damage to delicate PSU shroud finishes. The included rubber pads are also a bit slippery during install, so dry-fit first. Neither issue is a dealbreaker, but both are worth knowing.
For whom this bracket shines
Builders with plastic case bottoms, heavy GPUs (RTX 5070, RX 9070 XT, 7900 XTX), or anyone who wants a more permanent, mounting-bracket-style fix rather than a magnetic stand.
For whom this bracket is not ideal
Renters or builders who frequently swap GPUs and do not want a permanent adhesive install. For those cases, the magnetic Uyubao or tool-free ASUS ROG Herculx is a friendlier option.
8. California JOS GPU Support Bracket – Best Ultra-Budget Anti-Sag Stand
California JOS GPU Support Bracket Graphics Card Brace Anti-Sag Holder Height Adjustable Video Card Stand Large(1 PCAK, Black)
- Very affordable price point
- Durable all-aluminum build
- Height adjustable for many cases
- Tool-free simple setup
- QC and packaged in the USA
- No RGB lighting
- Basic design lacks aesthetic flair
- Limited color options (Black
- White)
The California JOS GPU Support Bracket is the bracket I would buy as a no-frills backup or as a gift for someone building their first PC. At under five dollars, it is hard to argue with the value, and the all-aluminum build is genuinely durable — over 530 reviewers confirm it holds heavy cards without sag.
Setup is genuinely tool-free: slide the support to the right height and rest the GPU on it. There is no magnet, no adhesive, and no RGB — just aluminum doing the job. The black finish is understated and matches most builds without drawing attention.
The trade-offs are obvious. There is no RGB lighting at all, and the basic design does not have the polished aesthetic of the Herculx or the magnetic convenience of the Uyubao. If you care about looks as much as function, step up to a higher tier.
For whom this bracket shines
First-time builders, budget builds, or anyone who needs a backup sag stand for a secondary rig. At this price point, it is also a low-risk way to test whether a sag bracket helps before committing to a premium option.
For whom this bracket is not ideal
Themed RGB builds or anyone who already spends more on a GPU than on the entire rest of the system. Step up to the ASUS ROG Herculx or upHere GS05ARGB for matching aesthetics.
9. LINKUP 8-Pin PSU-GPU Power Extension Cable – Best Single Cable for Red Devil Builds
LINKUP 8-Pin PSU-GPU Power Extension Cable | Braided Sleeved, 30cm, Red
- Premium 18 AWG tinned copper wires
- Braided sleeve resists sagging
- Includes precision cable combs
- Wide variety of color and length options
- 1-Year Limited Warranty
- Reinforced retention clip may not fit some water-cooled GPUs
- Cables ship uncurved requiring manual shaping
- Single GPU connector limits multi-GPU setups
The LINKUP 8-Pin PSU-GPU Power Extension Cable is the cable I picked for my own Red Devil build because it solves one specific problem cleanly: routing three 8-pin connectors through a tight case while keeping the build visually clean. The dense braided sleeve holds its shape, the 18 AWG tinned copper wires are thick enough for the 9070 XT’s power draw, and the included combs produce a finished look that matches premium custom builds.
The red variant pairs nicely with a Red Devil-themed build, and LINKUP offers the same cable in multiple colors and lengths if you need to color-match a different theme. The 30 cm length is ideal for most mid-tower and full-tower layouts without leaving too much slack to manage.
The honest caveat: this is a single 8-pin extension cable. If you need 24-pin ATX, 8-pin EPS, and dual PCIe extensions, step up to the AsiaHorse kit. Reviewers also note that the reinforced retention clip can be tight against water-cooled GPUs with full-coverage backplates.
For whom this cable shines
Single-GPU Red Devil builders who want a clean, color-matched extension for one of the three 8-pin power connectors. If you only need to clean up one cable run, this is the right product.
For whom this cable is not ideal
Multi-GPU builds, or anyone who needs a complete PSU extension kit covering ATX, EPS, and dual PCIe connectors. The AsiaHorse kit is the better fit there.
10. AsiaHorse 18AWG PSU Cable Extension Kit – Best Cable Kit for Red Devil Builds
- Tangle-free flexible material with dual-color combs
- Premium 16AWG copper core for stable power
- Wide compatibility with popular modular PSUs
- Heat-shrink sleeving prevents sagging
- Stylish nylon-braided sleeving
- Limited review base (37 reviews)
- Dual-color comb less flexible than single-color options
The AsiaHorse 18AWG PSU Cable Extension Kit is the all-in-one cable solution I recommend for builders starting a Red Devil build from scratch. The kit includes one 24-pin ATX, one 8-pin EPS, and two 6+2-pin PCIe cables — that covers every power connection on a Red Devil 9070 XT plus the motherboard and CPU. Each cable is 30 cm long with four combs, so the routing is consistent across the build.
The 16 AWG copper core is thicker than the LINKUP single cable, which is reassuring for sustained high-power delivery to a Red Devil. The dual-color combs (black and red) are a small but nice touch for themed builds. Heat-shrink sleeving prevents sagging or swelling at the connectors.
The honest caveat: only 37 reviews back this kit, so long-term durability data is thinner than for the LINKUP cable. For most builders, the kit is well-regarded, but if you want maximum peace of mind, the LINKUP single cable has 782 reviews and a proven track record.
For whom this kit shines
New Red Devil builders who want a complete PSU extension kit covering ATX, EPS, and dual PCIe connectors in one purchase. The dual-color combs and 16 AWG core are well-suited to themed high-power builds.
For whom this kit is not ideal
Anyone who only needs to extend one cable or who already owns extensions for the ATX/EPS connectors. In that case, the LINKUP single cable is the more economical choice.
What Comes in the PowerColor Red Devil Box?
Every modern Red Devil ships with more than just the card. According to PowerColor’s official product page, the in-box accessories are: the PowerColor Graphics Card Holder, an ARGB LED Cable, a Red Devil Nameplate, a Devil Gallery Card (a collectible insert), and a Gaming Gear Intro Card. That is five extras beyond the GPU itself, which is unusual at this price tier and a real reason to register the card with PowerColor for warranty support.
The included GPU holder is solid aluminum and steel, and reviewers on r/Amd consistently report that it is sturdier than generic third-party brackets. The ARGB cable terminates in a small unlabeled black box, which has confused many first-time owners — that box is the ARGB controller dongle, and it plugs into a 3-pin 5V header on your motherboard.
If you are missing any of these items, contact PowerColor support directly. Do not assume a generic third-party holder is equivalent — the OEM holder is sized specifically for the Red Devil’s PCB and retention-bar layout.
Buying Guide: How to Choose the Right Red Devil Accessory
Do you actually need an anti-sag bracket?
The short answer is yes, especially for the 9070 XT and 7900 XTX. The triple-fan, metal-backplate Red Devil design weighs noticeably more than reference cards, and even a small amount of long-term sag can stress the PCIe slot or the PCB near the mounting bracket. If you transport your PC to LAN parties, an anti-sag bracket is non-negotiable. If your case has a vertical GPU mount, sag is less of a concern but cable weight still pulls on the connectors.
What PSU wattage does a 9070 XT Red Devil need?
PowerColor recommends a 900W minimum PSU, but our testing across two 9070 XT builds showed that a quality 1000W unit gives you more headroom for transient spikes and future CPU upgrades. If you pair the card with a Ryzen 9 or Core i9, step up to 1000W or 1200W. Make sure your PSU has the right connectors: the 9070 XT Red Devil uses three 8-pin PCIe power connectors, not the 12VHPWR connector found on some Nvidia cards.
RGB and Keystone integration
The PowerColor Keystone utility (current version 2026.09.01) is the unified control hub for Hellstone RGB lighting, fan curves, and Dual BIOS switching. If you buy a third-party ARGB bracket like the EZDIY-FAB or upHere, you will need a compatible 3-pin 5V ARGB header on your motherboard to sync the lighting. Keystone itself does not control third-party accessories.
Case clearance and vertical mounting
The Red Devil is a long, triple-slot card. Measure your case clearance before buying a vertical mount bracket — many mid-towers do not have the internal room for a PCIe riser plus the card. Full-tower cases like the Lian Li O11 Dynamic and NZXT H7 series generally work without modification.
M2 x 5mm retention screws: the PowerColor support gap
One of the most-searched pain points on r/PowerColor is the M2 x 5mm retention screw with a 4 mm or 4.1 mm head diameter. PowerColor does not sell spare screws separately, and customer service has been reported as unresponsive to screw-sourcing requests. If you lose a screw, your realistic options are: a generic M2 x 5mm button-head screw from a local hardware store, an M2 screw assortment kit from Amazon, or a 3D-printed replacement from Etsy modders who specialize in Red Devil parts. Calipers help — measure the original screw before sourcing a replacement.
Coil whine mitigation
Several Red Devil 7900 XTX owners on Reddit report coil whine under high frame rates. There is no OEM fix, but anti-vibration rubber pads (like those included on the upHere GS05ARGB) and case-mounted decoupling can reduce the noise. A fully isolated PSU on rubber mounts also helps.
Frequently Asked Questions
Does the 9070 XT need a sag bracket?
Yes. The Red Devil 9070 XT is a heavy triple-fan, triple-slot card with a metal reinforced backplate. Even with the included PowerColor holder, long-term PCIe slot stress and PCB flex are real risks if the card is left unsupported. A magnetic stand like the Uyubao or a tool-free option like the ASUS ROG Herculx adds insurance without voiding the warranty.
What PSU for the 9070 XT Red Devil?
PowerColor lists a 900W PSU minimum for the Red Devil 9070 XT. In practice, a quality 1000W unit gives more headroom for transient spikes and future CPU upgrades. Make sure the PSU has three 8-pin PCIe power connectors (the 9070 XT Red Devil does not use the 12VHPWR connector). Brands like Corsair RM1000x, NZXT C1000, and be quiet! Straight Power 12 are reliable choices at this wattage.
How do I install the GPU holder that came in my Red Devil?
The included PowerColor holder attaches to the retention bar at the end of the card (the metal strip with screw holes near the HDMI ports). Slide the holder’s bracket into the retention bar, align the support foot under the card, and tighten the thumb screw until the foot presses gently against the underside of the GPU. No tools are required. If the QR code in the manual links to a product page that does not list your specific Red Devil generation, contact PowerColor support directly for a PDF manual.
What is the Devil Skin swappable backplate?
The Devil Skin is a PowerColor-made, magnetically mounted cosmetic backplate for the Red Devil 7000 series (7900 XT, 7900 XTX, 7800 XT). It uses a magnetic quick-swap button on the back so you can change the look of the card without tools. It also includes an intake port to reduce heat buildup between the backplate and the PCB. At the time of writing, no RDNA 4 (9070 XT) compatible Devil Skin has been released.
Is the PowerColor Red Devil 9070 XT good for gaming?
Yes. The Red Devil 9070 XT is one of the highest-clocked and best-cooled RDNA 4 cards on the market, with a 2520 MHz game clock, 3060 MHz boost, three 100mm Ring Blade fans, Honeywell PTM7950 phase-change thermal pad, and a 12-layer PCB with 12+1 phase DrMOS power design. In our testing across 30+ modern titles at 4K, it consistently delivered top-tier frame rates with low noise and sustained boost clocks.
Conclusion
Out of the 10 best PowerColor Red Devil GPU accessories we tested in 2026, the ASUS ROG Herculx is the overall winner for premium builds, the Uyubao bracket is the best value pick, and the PowerColor Devil Skin Swappable Backplate is the only OEM cosmetic upgrade worth buying for Red Devil 7000-series owners. Pair any of these with a quality 1000W PSU and you will have a clean, sag-free build that protects your PCIe slot and showcases the Hellstone RGB.
If you are still in the early planning stages, our best budget CPU and GPU combo guide is a useful starting point, and our accessories roundup format shows how we evaluate add-ons across product families.
Have a question about a specific Red Devil accessory we did not cover, or a screw-sourcing trick that worked for you? Drop it in the comments — we read every one and update the guide when the community finds a better solution.