The best under desk cable trays for cable management keep power strips, adapters, and excess cord length off the floor without making routine cable changes a chore. An under desk cable tray is simply a mounted holder that contains those items below the work surface, cutting visual clutter and keeping cables away from feet and chair wheels.
I would start with the mounting method, then measure the usable edge and underside of the desk before choosing a tray. That order matters most on a sit-stand setup, where the tray should travel with the desktop and leave a relaxed service loop down to the wall outlet.
A tray is only one part of a tidy workspace. Pair it with a monitor arm that reduces desk cable clutter, and see our guide to gaming desk cable management if a compact setup is the goal.
Table of Contents
Top 3 Picks for 2026
Mzmaxy is the broad everyday clamp pick, KEEGH is the high-capacity fabric option, and Litwaro is the compact clamp choice for a smaller cable bundle. All three attach without drilling, but their length, material, and stated load limits suit different desks.
These 12 under desk cable trays make cable management easier in 2026
The comparison below focuses on the details that change day-to-day ownership: attachment style, material, available length, and stated carrying capacity where the manufacturer provides one. A clamp model is easier to reposition; a screw-mounted model is the better fit when you want the tray to stay put.
| Product | Specifications | Action |
|---|---|---|
 Mzmaxy 25 inch Clamp Tray |
|
Check Latest Price |
| KEEGH 28 inch Fabric Tray |
|
Check Latest Price |
 Litwaro Compact Mesh Tray |
|
Check Latest Price |
 Univivi 36 inch Fabric Tray |
|
Check Latest Price |
 Xpatee 2 Pack Trays |
|
Check Latest Price |
 VIVO Clamp-on Tray |
|
Check Latest Price |
 Delamu 33 inch Screw Tray |
|
Check Latest Price |
 COYACOOL 2 Pack Trays |
|
Check Latest Price |
 Univivi 32 inch Steel Tray |
|
Check Latest Price |
 Scandinavian Hub Adhesive Set |
|
Check Latest Price |
 VIVO Low Profile Rack |
|
Check Latest Price |
 Delamu U-Channel 2 Pack |
|
Check Latest Price |
1. Mzmaxy 25 inch clamp tray is the strongest all-around no-drill pick
- Long 25 inch span
- No-drill clamp mount
- Metal mesh ventilation
- Rubber desk pads
- Minor assembly required
- Three-month manufacturer warranty
The Mzmaxy makes sense for a typical home office with a power strip, a few charging bricks, and monitor leads. Its 25-inch metal mesh body has a stated 15-pound capacity, while the open sides give cables an easy exit rather than trapping every lead in one direction.
Its clamp fits desks from 0.4 to 2 inches thick and can face inward or outward. That flexibility is useful when a rear crossbar, drawer, or wall limits where a cable management tray can sit.
It fits a standing desk with a clear front or rear edge
Because it clamps to the desktop, the tray rises and lowers with the desk. Leave slack only in the single bundle running from the tray to the outlet; loose slack inside the tray is less likely to snag.
It needs a buyer comfortable with brief assembly
The two tray parts need to be screwed together before clamping it on. That is a small trade for a long, ventilated metal under desk wire manager, but it is not a one-piece installation.
2. KEEGH 28 inch fabric tray is the capacity-first choice
- Very high stated capacity
- Clamp or screw options
- Fire-retardant fabric
- Five organizing belts
- Fabric can collect dust
- Only 5.5 inches wide
KEEGH brings a deep fabric-sling approach to the under desk cable tray category. The manufacturer states a 70-pound capacity, and the 28-inch length gives bulky adapters, extension leads, and a power strip far more room than a shallow metal channel.
The five included fixed belts are especially helpful for keeping a transformer brick from resting against a cable bundle. The fabric hides the contents well, which suits desks viewed from the doorway or the side.
It works best when bulky adapters need containment
The Oxford fabric can flex around irregular shapes that would overcrowd a narrow steel rack. You can clamp it to wood, metal, or glass, or choose screws when the desk is a permanent workstation.
It needs periodic cleaning in dusty rooms
Fabric has a different upkeep profile from open mesh: dust can settle on it. Empty the tray before wiping around it, and do not overload it simply because the stated limit is high.
3. Litwaro compact mesh tray is the practical pick for small desks
- Three-minute setup
- Carbon steel body
- Side cable holes
- Rubber desk pads
- Short length
- Large power strips may not fit
The Litwaro is a compact carbon-steel cable rack under desk for a modest collection of leads. Its 13.38-inch length and stated 15-pound limit are well matched to a laptop charger, small power strip, and the cables from one monitor.
Two cable holes on each side make routing less awkward than it is with a fully closed basket. The product data also lists a clamp range of 0.4 to 2 inches and assembly in about three minutes.
It suits a narrow desktop and a simple device list
This model wastes little space under a compact work surface. It is a sensible under desk cord organizer when you have one computer and do not need to store several large power bricks.
It requires measuring the power strip first
The short basket is its main limitation. Confirm the power strip’s length and plug orientation before ordering, especially if its cord leaves from an end rather than the side.
4. Univivi 36 inch fabric tray is the best long covered organizer
- Extra-long 36 inch format
- Two mount choices
- Flame-retardant fabric
- Unfolding access
- Needs 5.3 inch edge clearance
- Drawers can block clamps
Univivi’s 36-inch fabric model is made for a wider desk that needs a full-width cable zone. Its 5.5-inch width and height are designed to take adapters and sockets, while the supported base helps the fabric hold its shape under a loaded setup.
The tray unfolds, so adding a cable does not mean threading it through a narrow slot. Built-in ties also give you a place to secure heavier items instead of letting them shift every time the desk moves.
It fits wide desks with an unobstructed edge
Check for at least 5.3 inches along the edge before selecting clamp installation. A built-in drawer or a rear support rod can block that space even when the desktop itself is wide.
It supports people who change equipment often
The opening fabric design is friendly to a work setup that gains or loses devices. For a fixed installation, the screw option avoids depending on edge access altogether.
5. Xpatee two-pack trays are the flexible multi-zone option
- Two separate trays
- 31.4 inch combined length
- Open sides
- Clips and ties included
- 10 lb limit per tray
- Not one continuous basket
Xpatee supplies two 15.7-inch powder-coated metal trays instead of a single long tray. That gives a combined 31.4 inches of cable storage while letting you put one tray under the computer side and the other under a charging or console area.
Each tray has a stated 10-pound limit and fits desk thicknesses from 0.4 to 2.4 inches. The two open sides let you place a power strip without dismantling every connected device.
It gives L-shaped and gaming desks more routing choices
Separate trays are easier to position around a desk leg, cable grommet, or monitor-arm clamp. The included four cable clips and eight ties can guide the final short runs along the desktop edge.
It needs loads divided between both trays
Do not treat the pair as one 20-pound basket. Put heavier power hardware in a tray by itself and distribute lighter data cables and chargers in the other.
6. VIVO clamp-on tray is the neat power-strip holder for sit-stand desks
- Closed back hides contents
- Dual C-clamps
- Open front ventilation
- Moves with desk
- Fits desks up to 2 inches
- Clamps need hand tightening
The 17-inch VIVO DESK-CM6L-B targets one standard power strip and its surrounding leads. A closed back conceals the tray’s contents from normal viewing angles, while the open front preserves access for plugging and unplugging.
Its steel construction has a stated 11-pound capacity. The dual C-clamps install without drilling and include padding intended to protect the desktop surface.
It is a good match for a clean standing-desk profile
This tray moves with the desktop, so power access stays in the same place when you switch from sitting to standing. Plan the floor cable path first, then test the desk at its highest position before committing to clips or sleeves.
It needs a desk no thicker than 2 inches
The clamps require hand tightening and are specified for desks up to 2 inches thick. Measure the desk at the intended clamp point, not just at the exposed front edge.
7. Delamu 33 inch screw tray is the permanent wide metal option
- Pre-drilled mounting holes
- Long two-tray layout
- Ventilated metal
- Hardware included
- Drilling required
- May be long for compact desks
This Delamu set is the case for choosing screws over clamps: the trays are mounted where you want them and stay there. The two coated-metal pieces provide 33 inches of total space, with wide openings for placing or removing cords.
Delamu includes 12 screws, 12 anchors, and plastic sheets. The pre-drilled holes make layout easier, although you should still hold each tray in position to check that a drawer, apron, or frame does not interfere.
It is right for a fixed desk with a large cable load
A screw-mounted under desk cable holder can be placed farther from the edge than a clamp tray. This is useful when you want the cable zone hidden behind a desk apron or need two separate locations.
It requires confidence drilling into the desk
The mounting method is not reversible in the same way as a clamp. Use the supplied hardware as directed and confirm the desk material can accept screws before making holes.
8. COYACOOL two-pack trays are the simple screw-mounted pair
- Two compact trays
- 15 lb stated capacity
- Metal construction
- Included screws
- Drilling needed
- May not fit large power strips
COYACOOL’s two 14.5-inch metal trays bring a compact, permanent layout to a home office, studio, or shared workstation. Each is listed as holding up to 15 pounds when properly installed, giving small but sturdy zones for cords, hubs, and accessories.
The 5-inch width and 3.4-inch height are better suited to modest power hardware than oversized adapters. Put the tray close enough to device cables that they reach without extensions, but leave room to access plugs.
It is useful when cable groups should stay separate
Two trays let you keep computer power on one side and low-voltage data cables on the other. That arrangement makes future troubleshooting simpler because you can find a specific cable group quickly.
It needs a wood or wood-composite underside suitable for screws
The listing calls for four small drilled holes per tray. Avoid guessing around a hollow-core section, and check that a desk leg or structural rail is not in the mounting zone.
9. Univivi 32 inch steel tray is the dual-mount metal alternative
- No-drill or screw installation
- Long steel format
- Large cable holes
- Ventilated structure
- Dimensions not supplied
- Smaller review sample
The 32-inch Univivi steel tray gives buyers a choice between C-clips and screws without switching to fabric. Its enlarged cable holes and hollow construction are designed to make routing easier and allow heat to escape around power strips and chargers.
It is presented as a large-capacity organizer, though the provided product data does not state a weight limit or full dimensions. That missing detail is worth considering if you intend to load it with unusually heavy adapters.
It works for buyers who want to try a no-drill location first
C-clips let you test cable reach and desk clearance before selecting a permanent location. If the tray’s final home is clear of moving parts and drawers, screws provide the more fixed attachment.
It needs a careful fit check before purchase
Measure the available underside span and the size of the hardware you plan to store. The listed 32-inch length is useful, but it does not replace a confirmed depth and height measurement.
10. Scandinavian Hub adhesive set is the no-screw surface-friendly choice
- No tools required
- Two tray set
- Works on smooth surfaces
- Room for power strips
- PVC rather than metal
- Adhesion can weaken under heavy loads
Scandinavian Hub’s set is the straightforward answer for desks where drilling and clamps are not practical. The two 17-inch PVC trays use self-adhesive backing and are intended for smooth wood, glass, and similar surfaces.
The trade-off is that adhesive mounting depends heavily on surface preparation and load. Forum discussions repeatedly flag adhesive failure when a dusty surface or a heavy cable bundle asks too much of the tape.
It suits a clean smooth desk surface with a moderate load
Use it for several cables, a power strip, and lighter transformers rather than treating it as a shelf for dense equipment. Wipe the underside clean and dry before application, then follow the maker’s placement directions.
It is not the first pick for a heavy standing-desk bundle
Repeated movement does not harm a tray attached to the desktop by itself, but a heavy load puts continuing stress on adhesive. A clamp or screw model offers more confidence when the cable bundle is substantial.
11. VIVO low-profile rack is the slim permanent power-strip tray
- Slim 3 inch profile
- Partially closed design
- 11 lb stated capacity
- One-year warranty
- Screws required
- Narrower than basket trays
The VIVO DESK-AC06-1C is a 16.5-inch metal power-strip holder with a notably shallow 3-inch profile. Its partially closed design hides cords while the front opening keeps them reachable, and the manufacturer states an 11-pound capacity.
This is less of a catch-all basket and more of a controlled location for a narrow power strip and its immediate leads. It is a good way to avoid a bulky tray hanging visibly below a minimalist desktop.
It fits a desk where low visual bulk matters
Mounting this rack close to the rear underside can keep it out of the normal sightline. A shallow rack also leaves more knee clearance than deep fabric or mesh baskets.
It needs a narrow power-strip setup and screw access
Confirm that the strip is compatible with the 3-inch width and that its plugs can clear the front opening. The mounting holes are 11 inches apart, so mark those points before drilling.
12. Delamu U-channel two-pack is the accessory-rich dual-mount choice
- Tape or screw mounting
- Metal U-channels
- Extensive cable accessories
- Perforated ventilation
- Tape needs 24-hour cure
- Smooth clean surface required for tape
Delamu’s two 15.75-inch metal U-channels come with more routing hardware than most: cable ties, screw hardware, single-hole holders, four-hole holders, and an adhesive tape roll. That makes it a useful kit for a desk that needs both a tray and a way to guide cables to it.
It offers tape mounting with a stated 4-pound limit or screw mounting with a stated 11-pound limit. Perforations and pre-drilled holes support airflow and cable routing, not just storage.
It is best when the cable path needs more than a tray
The supplied holders help organize short cable runs beneath a desk or along its rear edge. That can prevent the common problem of neatly storing the power strip but leaving every monitor lead visible.
It needs patience if tape mounting is selected
The tape requires a 24-hour cure time before loading. Apply it only to a clean, dust-free, smooth surface; use the screw option when the cable load exceeds the tape-mounted limit.
The right tray depends on your desk edge, cable load, and installation preference
Start by mapping the equipment that must live below the desk: power strip, laptop brick, monitor power supplies, dock, chargers, and excess cable. This prevents the common mistake of choosing a narrow rack that cannot accept the largest item in the bundle.
Clamp mounting is the best choice when you need to reposition the tray
Clamp trays install without holes and naturally move with a height-adjustable desktop. Measure desk thickness at the actual mounting point, and look underneath for drawers, support rails, and control boxes that may collide with the clamp.
For more help pairing a tray with an adjustable workstation, read our guide to cable management for standing desks. The same planning applies to converters, which need their cables to move without pulling tight.
Screw mounting is the best choice for a fixed, long-term cable zone
Screws hold a metal tray firmly and let you position it farther under the desktop than many clamps. Check the desk construction first, mark holes with the tray held in place, and keep clear of any frame or crossbar.
A permanent tray is also easier to use on an L-shaped surface. If you are still choosing the desk itself, our cable management solutions for desks guide can help you think through usable space.
Adhesive mounting works only when the surface and load are right
Clean and dry the underside before applying tape, press firmly, and observe any cure time the manufacturer specifies. Adhesive trays work well for a modest cable bundle on smooth surfaces, but do not assume tape will behave like a screw mount under a heavy power strip.
A standing desk needs a service loop down to the outlet
Mount the tray to the moving desktop, collect cables in the tray, then run one bundled line toward the floor with enough slack for the desk’s full range. Raise and lower the desk slowly before adding cable clips; if anything pulls, add length or change the route.
A cable sleeve can make that final vertical run neater, while monitor arms reduce the dangling cables that start on the desktop. The goal is a controlled route with no sharp bends, not an over-tight bundle that is hard to service.
FAQs
What is the best under-desk cable management solution?
The best solution combines an under-desk tray for the power strip and adapters with cable clips or holders for short runs and one flexible bundle to the outlet. Choose a clamp tray for repositioning, a screw-mounted tray for a permanent setup, or adhesive only for a clean smooth surface and a modest load.
How do you attach cable management to a desk without screws?
Use a clamp-on tray or an adhesive tray. For clamps, measure desk thickness, attach the clamps where drawers and rails will not interfere, and hand-tighten them with their protective pads in place. For adhesive, clean and dry the smooth underside, apply the tray as directed, and allow the stated cure time before loading it.
Does cable management work with height-adjustable standing desks?
Yes. A tray mounted to the moving desktop rises and lowers with the desk. Route all desk-mounted equipment to the tray, then leave a relaxed service loop in the single cable bundle running to the wall outlet so it does not pull tight at maximum height.
What cable management accessories pair well with under desk trays?
Cable clips, reusable ties, cable sleeves, and monitor arms pair well with trays. The tray holds bulky items, clips guide individual leads, a sleeve tidies the floor run, and a monitor arm can reduce visible display-cable slack above the desk.
How do I hide cables under my desk?
Put the power strip and adapters in an under-desk tray, route each device cable into the tray with clips or holders, and bundle only the final line to the outlet. Test access to plugs and the desk’s full standing range before making the cable route permanent.
Final Thoughts
For an all-purpose clamp model, choose the Mzmaxy; choose KEEGH when bulky equipment needs the listed high-capacity fabric sling; and choose Delamu or COYACOOL when a screw-mounted installation is preferable. The best under desk cable trays for cable management in 2026 make the power hardware reachable, move safely with an adjustable desk, and leave only one neat cable path to the outlet.
Measure twice, install the tray before adding ties, and test every plug plus the full standing range. That small amount of planning keeps the desk cable organizer helpful when your setup changes later.