Finding the best bass boats means more than picking a hull and an outboard motor. It means outfitting that boat with the right electronics, trolling motor, seating, batteries, and accessories that turn a fiberglass or aluminum shell into a true tournament-ready fishing machine.
Our team has spent years on lakes and rivers testing bass fishing boats from Ranger, Nitro, Tracker, Bass Cat, and Skeeter. Along the way, we learned that the accessories you bolt onto your boat matter just as much as the hull design. A bass boat with a cheap fish finder and a weak battery will frustrate you every single trip.
This guide covers the eight essential pieces of gear every serious bass angler needs in 2026. Whether you are rigging out a brand new fiberglass tournament boat or upgrading an aluminum rig you picked up used, these products represent the best value, performance, and reliability we have found after months of hands-on testing.
Table of Contents
Top 3 Picks for Best Bass Boats in 2026
These three products form the backbone of any well-equipped bass boat. Start here if you are building your rig from scratch.
Garmin Striker 4 Fishfinder
- CHIRP Sonar
- GPS Waypoint Mapping
- ClearVu Scanning
- 3.5 inch Display
Minn Kota Endura C2 Trolling Motor
- 30 lb Thrust
- 5 Forward Speeds
- Composite Shaft
- Transom Mount
Best Bass Boats in 2026
Below is our complete comparison table of all eight products every bass boat owner should consider. Each one fills a specific role, from fish finding to docking to power management.
| Product | Specifications | Action |
|---|---|---|
| Garmin Striker 4 Fishfinder |
|
Check Latest Price |
| Minn Kota Endura C2 Trolling Motor |
|
Check Latest Price |
| Millennium Marine B100 Boat Seat |
|
Check Latest Price |
 Renogy Deep Cycle AGM 100Ah Battery |
|
Check Latest Price |
 Botepon Bungee Dock Lines |
|
Check Latest Price |
 OHIKA Microfiber Fishing Towels |
|
Check Latest Price |
 PROcise Outdoors Fish Finder Deck Mount |
|
Check Latest Price |
 AmarinePlay Bass Boat Casting Seat |
|
Check Latest Price |
1. Garmin Striker 4 Fishfinder – CHIRP Sonar with GPS
Garmin 010-01550-00 Striker 4 with Transducer, 3.5" GPS Fishfinder with Chirp
- ClearVu scanning sonar shows near-photographic underwater images
- CHIRP sonar creates crisper fish arches with better target separation
- Built-in flasher ideal for ice fishing or vertical jigging
- Waypoint map for marking brush piles stumps and docks
- Keyed interface with dedicated buttons for easy operation
- Limited to 1600 feet depth freshwater and 750 feet saltwater
- Small 3.5 inch display may be hard to read at speed
I mounted the Garmin Striker 4 on the bow of my Tracker bass boat last spring, and it completely changed how I fish unfamiliar water. The CHIRP sonar produces fish arches that are sharp and easy to distinguish from structure. At 9,293 reviews and a 4.6-star rating, this is one of the most trusted fish finders in the bass fishing community.
The ClearVu scanning sonar is where this unit really shines for bass anglers. I could see individual brush piles, stumps, and rock piles with near-photographic clarity in 20 feet of water. Being able to mark waypoints on those pieces of cover meant I could run a trolling motor right back over them on the next pass.
The GPS functionality is basic but genuinely useful. I marked a creek channel bend on my home lake that held bass all summer long. Every time I launched, I could navigate straight to it. The waypoint map is not a full chartplotter, but for bass boats fishing local water, it does the job.
The 3.5-inch display is the main drawback. It is readable, but if your bass boat has a large casting deck and you are standing several feet away, you may strain to see detail. Many anglers on bass fishing forums recommend this as a bow-mounted secondary unit paired with a larger graph at the console.
Best Use Case for This Fish Finder
The Striker 4 is perfect for smaller aluminum bass boats, jon boats, and kayaks where console space is limited. It also works great as a bow-mounted unit on larger fiberglass rigs where you want a dedicated shallow-water scanning display close to the trolling motor foot pedal.
If you fish tournaments where every second of scanning counts, pair this with a larger 9-inch unit at the console. The Striker 4 handles close-range casting decisions while your main graph covers navigation and broad structure scanning.
Installation Tips for Bass Boats
Mount the transducer on the trolling motor shaft using the included motor mount for the best shallow-water performance. This gives you a forward-looking view as you work the trolling motor along shoreline cover.
For transom mounting on bass boats with pad-V hulls, make sure the transducer sits below the hull bottom by about an eighth of an inch. This prevents air bubbles from disrupting the sonar signal at trolling speeds.
2. Minn Kota Endura C2 Trolling Motor – Reliable Thrust
Minn Kota Endura C2 Transom-Mount Electric Trolling Motor – 30 Lb. Thrust, 30 In. Shaft, Freshwater
- Telescoping tiller provides easy comfortable control
- 10-position lever lock bracket for quick adjustments
- Power prop handles heavy vegetation
- Indestructible composite shaft for long-lasting durability
- 5 forward speeds and 3 reverse speeds
- Transom mount only not suitable for bow mounting
- 30 lb thrust may be light for larger fiberglass bass boats
The Minn Kota Endura C2 is the trolling motor I recommend to every first-time bass boat owner. At 30 pounds of thrust, it provides enough power to move a small aluminum bass boat through wind and current without draining your battery in an hour. The 4.6-star rating across 586 reviews tells you this motor has earned its reputation.
I ran this motor on a 16-foot aluminum bass boat for two full seasons. The telescoping tiller extends 6 inches, which made it easy to control from different positions on the rear deck. The composite shaft took a beating from stump collisions and never showed a crack.
The 10-position lever lock bracket is one of those features you do not appreciate until you use it. You can adjust the motor depth in seconds without tools. When I transitioned from a shallow stump field to deeper weed edges, I could drop the shaft deeper in about five seconds.
The Power Prop that comes standard handles grass and light vegetation better than you might expect. It will not chew through heavy hydrilla like a weedless Wedge prop, but for most weekend bass fishing situations on natural lakes and rivers, it gets the job done.
Matching Thrust to Your Boat Size
The 30-pound thrust model is ideal for aluminum bass boats up to about 16 feet and 1,200 pounds. If you are running a heavier fiberglass bass boat in the 18 to 20-foot range, consider stepping up to the 45 or 55-pound thrust versions of the Endura series.
A general rule from tournament anglers: you want at least 2 pounds of thrust for every 100 pounds of fully loaded boat weight. Factor in your battery, gear, fuel, and passenger weight when calculating.
Battery Setup for All-Day Fishing
This motor runs on a single 12-volt battery, which keeps your wiring simple. Pair it with a quality deep cycle AGM battery like the Renogy 100Ah we review below, and you will get a full day of fishing on a single charge in moderate conditions.
Keep a battery meter handy. The push-to-test meter on newer models helps you avoid the dreaded mid-day power loss that cuts your fishing trip short.
3. Millennium Marine B100 Boat Seat – All-Day Comfort
- ComfortMax contoured tight sling seat with breathable fabric
- UV mold and mildew resistant
- Folds flat for extra space when needed
- Durable aluminum frame construction
- Universal fit for any boat seat pedestal
- Not Prime eligible
- Seat width of 10 inches may feel narrow for larger anglers
The Millennium Marine B100 is the highest-rated product in this entire guide at 4.8 stars across 1,538 reviews. I added one to the bow casting deck of my bass boat, and it transformed long tournament days from back-breaking endurance tests into comfortable fishing sessions.
The ComfortMax sling design uses a contoured, tight fabric that supports you like a hammock. Unlike cheap vinyl seats that compress and harden over time, this seat maintains its shape and comfort through years of use. The breathable fabric keeps you cool even during those sweltering July tournament blasts.
At 7.1 pounds with an aluminum frame, this seat is light enough to move around when you need to reconfigure your deck layout. It folds flat, which matters when you are trying to squeeze extra rods or a cooler into limited storage space on a smaller aluminum bass boat.
The UV, mold, and mildew resistance is not marketing fluff. I left my B100 uncovered through an entire summer in the south, and the fabric showed zero fading or degradation. Rain water drains right through the sling instead of pooling like it does on cushioned seats.
Pedestal Compatibility
The B100 fits any standard boat seat pedestal with a universal mount pattern. It drops right onto the 1.77-inch diameter bases that come standard on most Ranger, Nitro, and Tracker bass boats. No adapters or modifications needed.
If your bass boat has older swivel mounts, check the bolt pattern before ordering. Most modern bass boats use the standard 4-bolt pattern that Millennium designed this seat around.
Long-Term Durability Expectations
Based on forum reports from r/bassboats users, the B100 typically lasts 5 to 7 years of regular use before the fabric needs replacing. The aluminum frame itself is essentially permanent unless you damage it in a collision or trailer incident.
The one-year warranty is shorter than I would like, but the build quality more than compensates. This is a seat designed for anglers who actually use their boats, not showroom decoration.
4. Renogy Deep Cycle AGM 100Ah Battery – Power That Lasts
- Trusted brand with 230000 plus units sold worldwide
- Exceptional safety due to higher chemical stability
- Works in extreme temperatures from -4 to 140F
- 1100A max discharge current powers most appliances
- Long shelf life with only 3 percent monthly self-discharge
- Heavy at 63.9 pounds
- Not Prime eligible
Every bass boat needs a reliable deep cycle battery for the trolling motor, and the Renogy 100Ah AGM is the one I trust. With over 2,200 reviews and a 4.4-star rating, this battery has proven itself across thousands of bass boats, RVs, and marine applications nationwide.
I ran this battery through an entire tournament season powering a 55-pound thrust trolling motor on my fiberglass bass boat. On a full charge, it delivered 6 to 7 hours of intermittent trolling motor use on a single battery. That is enough to cover a full tournament day with power to spare.
The AGM design means zero maintenance. No water top-offs, no acid spills in your battery compartment, no corrosion on terminals. For bass boat owners who store their rigs in garages and want hassle-free power, AGM is the right call. The 3% monthly self-discharge rate means your battery stays ready even during winter storage.
The temperature range is impressive. I fished a February tournament where morning temps hit 12 degrees, and the Renogy cranked right up. In the heat of August, the battery never showed performance drop-off. The chemical stability of AGM construction handles extreme conditions better than flooded lead-acid batteries.
Wiring Multiple Batteries for Tournament Use
The Renogy AGM supports series connections with no limit and parallel connections up to 4 batteries. For tournament bass boats running 24-volt trolling motors, wire two of these in series for 100Ah at 24 volts. That gives you serious all-day runtime even in heavy wind.
Use proper marine-grade battery cables and corrosion-resistant terminals. The last thing you want is a voltage drop from cheap cables killing your trolling motor power halfway through a tournament.
Charging Best Practices
Pair this battery with a quality onboard charger. I recommend a smart charger that monitors each battery independently and adjusts the charging profile for AGM chemistry. Overcharging is the number one killer of AGM batteries, and a good charger prevents that entirely.
Recharge within 24 hours of each fishing trip. Letting an AGM battery sit discharged for days or weeks will permanently reduce its capacity. A disciplined charging routine extends battery life from 2 years to 4 or more.
5. Botepon Bungee Dock Lines – Quick Mooring Solution
- Quick connect design docks within 10 seconds no knots needed
- Shock absorbing bungee protects boat from waves
- Tensile strength 2150 lbs secures boats up to 4000 pounds
- Stainless steel hardware resists corrosion
- Great for temporary docking and tying boats together
- Not suitable for permanent docking or overnight mooring
- May stretch too much for heavier fiberglass boats in rough water
These Botepon bungee dock lines are the kind of product you do not realize you need until you use them. At 4,294 reviews and a 4.7-star rating, they have become a staple accessory on bass boats across the country. I keep two of them in my rod locker for every trip.
The quick-connect design lets you secure your bass boat to a dock in under 10 seconds. No fumbling with knots when your hands are wet and cold. You simply loop the attachment over a cleat or piling and pull tight. The stainless steel hardware holds firm without scratching your gel coat.
The built-in bungee absorbs shock from waves and boat wake. If you have ever watched your bass boat slam against a dock because a stiff line had no give, you understand why this matters. The elastic section takes the abuse instead of your cleats and hull.
These lines stretch from 4 feet to 5.5 feet, which works well for most dock situations. I use them at boat ramps when waiting for my truck and trailer, at marina gas docks, and for rafting up with other bass boats during a lunch break on the water.
When to Use These vs Standard Dock Lines
Bungee dock lines are designed for temporary mooring, not overnight storage. Use them for quick stops at gas docks, restaurant docks, and boat ramps. For overnight or permanent docking, switch to traditional non-elastic lines that will not stretch under sustained load.
The 2,150-pound tensile strength handles bass boats up to about 4,000 pounds. Most tournament bass boats with motors and gear fall well within that range.
Care and Longevity
Rinse the stainless steel hardware with fresh water after each saltwater or brackish water use. The nylon and bungee material itself is low maintenance, but salt buildup on the hardware can cause stiffness over time.
Store them out of direct UV exposure when not in use. The bungee elastic will degrade faster if left baking in the sun on your casting deck between uses.
6. OHIKA Microfiber Fishing Towels – Keep Gear Clean
- High quality waffle pattern microfiber
- Quick drying and super absorbent
- Lightweight and stain resistant
- Comes with metal carabiner for easy access
- Versatile for fishing camping hiking and gym use
- Small size may not suit all use cases
- May require frequent washing to maintain absorbency
It might seem odd to include fishing towels in a bass boat gear guide, but any serious angler knows how fast slime, bait residue, and sunscreen can coat your hands and boat deck. The OHIKA microfiber towels solve this problem for under $10, and their 4.8-star rating across 555 reviews proves they punch well above their price point.
The waffle pattern microfiber grabs fish slime and oil off your hands in one wipe. I clip one to my pedestal seat base using the included carabiner so it is always within arm’s reach. After unhooking a bass, one quick wipe and my hands are clean enough to handle rods and reels without gunking them up.
The 16 by 16-inch size is perfect for bass boats. They are large enough to be useful but small enough to not clutter your deck. The waffle texture also makes them excellent for wiping down your fish finder screen after a rainy morning on the water.
The pack of three means you can station one at the bow, one at the console, and keep a spare in your tackle storage. At this price, replacing them each season costs less than a single pack of soft plastics.
Cleaning and Maintenance
Machine wash these towels in cold water without fabric softener. Fabric softener coats microfiber fibers and destroys their absorbency. Tumble dry on low heat or air dry.
Replace them every season if you fish regularly. Microfiber loses its grab after dozens of wash cycles, and fresh towels cost so little that there is no reason to push worn ones into a new year.
Alternative Uses on a Bass Boat
Beyond hand cleaning, these towels work great for wiping down your casting deck at the end of the day. They pick up spilled attractant, worm oil, and drink residue without spreading it around. Some anglers on fishing forums also use them to cover electronics during transport to prevent screen scratches.
The carabiner clip makes them easy to attach anywhere on your bass boat without drilling additional mounting hardware.
7. PROcise Outdoors Fish Finder Deck Mount – Tournament-Grade Bracket
- Superior visibility with 22.5 degree angled viewing
- Marine-grade aluminum with corrosion-resistant coating
- Universally compatible with Garmin Lowrance and Humminbird
- Pre-drilled for perfect alignment and easy installation
- Lifetime warranty included
- For the price should include basic mounting hardware
- May be overkill for casual weekend anglers
The PROcise Outdoors DEK-IT mount is the gold standard for bass boat fish finder installation. This 22.5-degree angled bracket positions your graph at the perfect viewing angle from a standing position on the casting deck. With a 4.7-star rating across 167 reviews, tournament anglers swear by this mount.
I installed one on my bow deck to hold a 9-inch graph, and the difference in visibility was immediately noticeable. The 22.5-degree angle tilts the screen toward your eyes when you are standing at the trolling motor. No more crouching down to read your sonar in bright sunlight.
The marine-grade aluminum construction is bomb-proof. This mount does not flex or vibrate even when you are running 70 mph across choppy water. The powder-coated finish resists corrosion from rain, spray, and the occasional saltwater excursion. It comes with a lifetime warranty, which tells you PROcise stands behind the build.
Universal compatibility means this mount works with Garmin, Lowrance, and Humminbird units. The pre-drilled hole patterns align with standard graph mounting brackets, so installation takes about 15 minutes with basic hand tools.
Installation on Aluminum vs Fiberglass Decks
On fiberglass bass boats, use stainless steel machine screws with backing plates underneath the deck. The deck core on most fiberglass rigs can handle the load, but backing plates distribute stress and prevent gel coat cracks around the mounting holes.
On aluminum bass boats, use self-tapping stainless screws with a sealant. Apply marine sealant to every screw hole to prevent water intrusion into your hull. Aluminum boats flex more than fiberglass, so check mounting hardware tightness after the first few trips.
Why Angled Mounts Beat Flush Mounts
Flush-mounted graphs sit flat on the deck, which means you look straight down at them. That forces you into a hunched posture that kills your back over a long tournament day. The 22.5-degree angle of the DEK-IT brings the screen to you, reducing neck and back fatigue.
Tournament anglers on bass fishing forums consistently report that angled mounts improve their ability to read sonar at a glance while maintaining focus on their cast. The time savings from not constantly adjusting your viewing position adds up over an 8-hour tournament.
8. AmarinePlay Bass Boat Casting Seat – Adjustable Pedestal Kit
- Comfortable padding with good foam that springs back
- Marine-grade anodized aluminum construction
- Adjustable height from 14-19 inches
- 360 degree swivel functionality
- Fits standard 1.77-inch diameter boat seat bases
- Great value for the price
- May feel slightly wobbly under heavy use
- Some users reported missing hardware in package
- Screws could be more robust
The AmarinePlay casting seat with pedestal is a complete seating solution for bass boats at a fraction of what premium seats cost. At 4.4 stars across 80 reviews, it delivers solid value for anglers who need a functional seat and pedestal without spending hundreds on name-brand marine furniture.
I installed this as a replacement seat on a used Tracker bass boat I was refurbishing. The adjustable height from 14 to 19 inches let me dial in the perfect position for my casting angle. The 360-degree swivel made it easy to turn and work the back deck without unmounting.
The marine-grade vinyl and ABS plastic seat construction holds up to rain, sun, and fish slime. The foam padding has good spring-back, meaning it does not flatten into a pancake after a few months of use. For the price, the comfort level exceeds expectations.
The anodized aluminum pedestal resists corrosion, which matters if you fish in brackish water or leave your boat outside. The wedge bushing and bearing system provides a smooth swivel action that does not squeak or bind like cheaper pedestal designs.
Fitting This Seat to Your Bass Boat
This pedestal fits standard 1.77-inch diameter boat seat bases, which is the most common size on Ranger, Nitro, Triton, and Tracker bass boats. Measure your existing base inner diameter before ordering to confirm compatibility.
If your bass boat has an older non-standard base, you may need an adapter sleeve. Most marine dealers carry these for a reasonable price, and installation takes about five minutes.
Long-Term Performance Expectations
Based on user reviews, expect 2 to 3 seasons of regular use from the seat cushion before the vinyl shows cracking or fading. The aluminum pedestal itself should last indefinitely with basic care. At this price point, replacing the seat portion every few years is still cheaper than buying a single premium marine seat.
Check the mounting screws after the first few trips. Some users reported that the included hardware could be more robust, so consider upgrading to stainless steel screws for long-term reliability on your bass boat.
Buying Guide: How to Choose the Right Bass Boat Gear
Outfitting the best bass boats requires understanding how each component works together. The wrong fish finder on a great hull wastes the boat’s potential. The wrong battery on a good trolling motor leaves you stranded. Here is what matters most when building your rig.
Fiberglass vs Aluminum Bass Boats
Fiberglass bass boats from brands like Ranger, Bass Cat, and Skeeter offer smoother rides in rough water and better speed characteristics. They typically have larger casting decks, deeper livewells, and more storage. The trade-off is higher cost, heavier towing requirements, and more expensive repairs if you damage the hull.
Aluminum bass boats from Tracker, G3, Lund, and Xpress cost less, weigh less, and draft shallower. They are easier to tow with a mid-size truck and simpler to maintain. Aluminum does ride rougher in choppy water and typically tops out at lower speeds than comparable fiberglass rigs.
Electronics: The Foundation of Modern Bass Fishing
Every bass boat needs at least one quality fish finder. Modern bass fishing relies heavily on electronics to locate structure, baitfish, and bass. Start with a unit like the Garmin Striker 4 for basic sonar and GPS, then upgrade to larger units with side imaging and down imaging as your budget allows.
For tournament fishing, two graphs are standard: one at the console for navigation and one on the bow for close-range casting decisions. Pair them with a solid deck mount like the PROcise Outdoors bracket for optimal viewing angles.
Trolling Motor Selection by Boat Type
Match your trolling motor thrust to your boat weight. Aluminum bass boats under 16 feet work well with 30 to 45 pounds of thrust. Fiberglass bass boats in the 18 to 20-foot range need 55 to 80 pounds of thrust for adequate control in wind and current.
Bow-mount trolling motors with foot control are standard on serious bass boats. They let you control boat position hands-free while casting. Transom-mount motors like the Minn Kota Endura C2 work well on smaller aluminum rigs and as backup motors.
Power Management
Your trolling motor battery is the heart of your bass boat’s electrical system. Invest in quality deep cycle batteries and maintain them properly. AGM batteries like the Renogy 100Ah offer maintenance-free operation and excellent temperature performance. For 24-volt trolling motor systems, you will need two 12-volt batteries wired in series.
Always recharge batteries within 24 hours of each trip. Use a smart onboard charger that matches the battery chemistry. A well-maintained AGM battery lasts 3 to 5 years; a neglected one dies in 12 to 18 months.
Seating and Comfort
Tournament anglers spend 8-plus hours standing and sitting on their bass boat decks. Quality seating is not a luxury; it is a performance issue. Look for seats with breathable, UV-resistant fabric and sturdy aluminum frames. The Millennium Marine B100 sets the standard for bass boat seating comfort and durability.
If your budget is tight, the AmarinePlay casting seat kit provides a complete seat and pedestal solution at a fraction of premium pricing. Either way, do not skimp on the seat where you will spend hundreds of hours each season.
Towing and Storage Considerations
Before buying any bass boat, verify your tow vehicle capacity. A typical 19-foot fiberglass bass boat with motor, fuel, and gear weighs 3,000 to 4,000 pounds on the trailer. Add trailer weight, and you need a truck rated for at least 5,000 pounds of towing capacity.
Aluminum bass boats are significantly lighter. A 17-foot aluminum rig often weighs under 2,000 pounds fully loaded, making it towable by many mid-size SUVs and crossovers. This is a major advantage for first-time buyers who may not own a full-size truck.
Storage is the hidden cost of bass boat ownership. If you do not have covered garage space, factor in marina storage fees. A quality boat cover and trailer jack are essential accessories for any bass boat stored outdoors.
FAQs
What is the top of the line bass boat?
The top of the line bass boats in 2026 come from brands like Ranger, Bass Cat, and Skeeter. Models like the Ranger Z520L and Bass Cat Jaguar STS represent the premium tier with top-tier hull construction, massive casting decks, and tournament-ready features. These boats typically run 200 to 250 horsepower outboards and are priced for serious tournament competitors.
What is the smoothest riding bass boat?
Fiberglass bass boats with deep-V hull designs and 16-degree or greater deadrise angles provide the smoothest ride in rough water. Bass Cat and Ranger are consistently praised by tournament anglers for ride quality. The hull design absorbs chop better than aluminum hulls, making long runs across big lakes more comfortable and safer.
What is the most sold bass boat?
Tracker and Nitro are among the most sold bass boat brands in the United States. Tracker aluminum bass boats dominate the entry-level market due to affordable pricing and wide dealer availability. Nitro fiberglass boats are popular among mid-range tournament anglers. Ranger remains one of the most recognized and respected brands among serious tournament competitors.
What is the most reliable boat brand?
Ranger, Bass Cat, and Skeeter are widely considered the most reliable bass boat brands based on owner surveys and long-term ownership reports. These brands have strong dealer networks, consistent build quality, and excellent resale value. Among aluminum boats, Xpress stands out with a lifetime hull warranty that demonstrates manufacturer confidence in long-term durability.
Should I buy a new or used bass boat?
Buying a used bass boat often provides better value because boats depreciate significantly in the first two to three years. A 3 to 5-year-old fiberglass bass boat from a quality brand like Ranger or Nitro can cost half its original price while still offering years of reliable service. Always inspect used boats for hull damage, electrical issues, and motor hours before purchasing.
Conclusion
The best bass boats are only as good as the gear you put on them. After testing these eight products across hundreds of hours on the water, our top recommendation is the Garmin Striker 4 for fish finding, the Minn Kota Endura C2 for trolling power, and the Millennium Marine B100 for all-day seating comfort.
Whether you are rigging a tournament-ready fiberglass bass boat or outfitting a practical aluminum rig, these accessories deliver the performance, reliability, and value that serious bass anglers demand in 2026. Start with the electronics and power systems, then build out comfort and convenience accessories as your budget allows.